Yoshimi Kato – Gyuto 210mm – VG10 Damascus
R4,250.00
Yoshimi Kato
Yoshimi Kato apprenticed at Kanehiro Hamono and then apprenticed under the guidance of Hiroshi-San (his Father in Law) who has also taught great blacksmiths like Yu Kurosaki. Yoshimi Kato strives to continuously improve his skills day by day working from Takefu knife village. Unusual for a blacksmith, Kato-San does not favor a particular steel. He is skilled with all steels that he uses. He believes that heat treating is where you should pay the most attention.
The blade is made from VG10 Stainless. Its a very popular stainless steel for knife makers in Japan. It is produced by Takefu Special steel Co. Ltd. VG10 is specifically designed for kitchen knife making. Its’s relatively easy to work, has great edge retention, hardness and ductility. VG10 is usually hardened to 60-61 HRC.
Gyuto (Chefs Knife):
The Gyuto is a Japanese designed chef’s knife. Gyutos vary widely in design but generally range from 210mm to 270mm in length though smaller and larger examples can be found. Like the familiar western styled chef’s knife, Gyutos are commonly tall at the heel, have a reasonably flat profile toward the heel for chopping, a belly toward the tip of the blade for rock cutting, and a pointed tip for precision work.
Knife Specifications:
Knife Shape: Gyuto
Blade Length: 210 mm
Steel Type: VG10 Stainless
Rockwell Hardness: 61:63
Delivery time: 3 to 5 Working days
FREE DELIVERY ACROSS SOUTH AFRICA
We use Payfast and EFT as payment method.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Out of stock
Related Products
Sakai Kikumori SG2 Powdered Steel – Gyuto 210mm
Sakai Kikumori
With a passionate devotion to knife-making as well as working with some of the most skilled craftsman in Japan, Sakai Kikumori has been making cutlery of incredible quality and performance since its inception in 1926.
The Kikumori SG2 Gyuto is constructed using an SG2 core steel which is cladded in softer stainless steel. SG2 is a powdered steel which can hold a very fine, super sharp edge for extended periods of time due to its exceptional hardness. The stainless steel cladding not only adds to the aesthetic of the blade but also provides added resistance to corrosion. The handle is a Western Style handle with a full tang construction and is made from Brown Polywood. The Gyuto, an all round knife which can be used for various tasks, is the Japanese version of a chef’s knife. Gyuto’s generally have a flatter blade profile near the heel to aid in chopping, a rounder belly for rock chopping and a sharp, pointed tip for precision cutting.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Sakai Kikumori AUS10 – Wa-Gyuto 210mm
Sakai Kikumori
With a passionate devotion to knife-making as well as working with some of the most skilled craftsman in Japan, Sakai Kikumori has been making cutlery of incredible quality and performance since its inception in 1926.
The Kikumori Hammered Damascus Wa-Gyuto is constructed using a core steel of AUS-10, a stainless steel with a high carbon content that is easy to sharpen and will hold a sharper edge for longer periods of time. AUS-10 is hard yet flexible making it a good compromise between edge retention and durability. The core steel is cladded in softer stainless steel with a polished hammered and Damascus finish giving this blade its striking appearance and aids in further preventing corrosion. The handle is octagonal in shape made from magnolia with a buffalo horn ferrule. The Gyuto, an all round knife which can be used for various tasks, is the Japanese version of a chef’s knife. Gyuto’s generally have a flatter blade profile near the heel to aid in chopping, a rounder belly for rock chopping and a sharp, pointed tip for precision cutting.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Sakai Kikumori – VG10 Hammered Damascus Gyuto 210mm
Sakai Kikumori
With a passionate devotion to knife-making as well as working with some of the most skilled craftsman in Japan, Sakai Kikumori has been making cutlery of incredible quality and performance since its inception in 1926.
The Kikumori Damascus 210mm Gyuto is constructed using a core steel of VG10, a cutlery grade stainless steel produced in Japan. It has a high carbon content which allows it to be heat treated to higher hardness levels thus allowing the blade to take on finer, sharper edges whilst being able to maintain that edge for prolonged periods of time. The core steel is cladded in softer stainless steel with a polished hammered and Damascus finish giving this blade its striking appearance and aids in further preventing corrosion. The handle is a western style handle made from Black Polywood and has a stainless steel half bolster. The Gyuto, an all round knife which can be used for various tasks, is the Japanese version of a chef’s knife. Gyuto’s generally have a flatter blade profile near the heel to aid in chopping, a rounder belly for rock chopping and a sharp, pointed tip for precision cutting.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Sakai Kikumori – AUS10 Damascus Gyuto 210mm
Sakai Kikumori
With a passionate devotion to knife-making as well as working with some of the most skilled craftsman in Japan, Sakai Kikumori has been making cutlery of incredible quality and performance since its inception in 1926.
The Kikumori Damascus Gyuto is constructed using an AUS-10 core steel which is cladded in softer stainless steel with a high polished Damascus pattern. AUS-10 is a stainless steel with a high carbon content and is heat treated between 59-60 meaning it is slightly harder and therefore it’ll be able to hold sharper edges without dulling as quickly. The handle is a Western Style Handle made from Black Polywood with a stainless steel half bolster. The Gyuto, an all round knife which can be used for various tasks, is the Japanese version of a chef’s knife. Gyuto’s generally have a flatter blade profile near the heel to aid in chopping, a rounder belly for rock chopping and a sharp, pointed tip for precision cutting.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Narihira – Santoku 165mm
Narihira
Narihira knives are manufactured by Fuji Cutlery Co., Ltd.
The sister company of Tojiro applies advanced construction techniques and modern materials, combined with high quality Japanese quality control to obtain great knives suitable for chefs, home cooks and professionals at a great price.
Santoku:
This is also a multi-purpose knife, but with a slight vegetable bias. Santoku means ‘Three Virtues’ or ‘To solve Three Problems’. The virtues or problems are slicing, dicing and mincing. Santoku is usually found in 160mm – 190mm lengths. These are more and more popular in Western kitchens due to the unique shape and smaller easy to handle size.
Molybdenum Vanadium Stainless steel:
AUS 8 is a high carbon, low chromium stainless steel that has proven, over time, to be a very good compromise between toughness, strength, edge holding and resistance to corrosion.
It has added Vanadium to give the steel more hardness. This steel is very easy to sharpen to a razor edge but it will dull relatively quickly compared to high-carbon.
Knife Specifications:
Knife Shape: Santoku
Blade Length: 165mm
Steel Type: Molybdenum Vanadium Steel
Rockwell Hardness: 59
Handle Material: Western Handle
Delivery time: 3 to 4 Working days
FREE SHIPPING for orders over R850
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Tojiro – Hammered Kurouchi Gyuto
Tojiro Knives
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied.
Our knives are produced by traditional techniques and combines modern industrial technology are held in the highest regard not only in Japan, but around the world.
The Tojiro Hammered Series features a 3-ply clad construction with a core of VG-10 super steel. This formula of steel results in 60 Rockwell Hardness and provides a 9-12 degree blade angle for scalpel-like sharpness.
The handle is made from Japanese magnolia, which has a smooth texture and is moisture-resistant. The closed rein collar allows for full and complete sharpening of the blade. Each knife is hand-finished by an artisan craftsman.
Tojiro is exclusively distributed in South Africa by Kitchen Samurai.
About the Gyuto:
The Gyuto is a Japanese designed chef’s knife. Gyutos are multi-purpose knives, with a slight meat cutting bias but if you want one knife to do it all, this shape is it.
The longer blade typically gives the blade a forward balance that allows is to work for you, to fit your cutting style. While the balde would ideally be slid forward or back while cutting, they also work great if you prefer to ‘rock’ your knife while cutting.
Gyutos vary widely in design but generally range from 210mm to 270mm in length though smaller and larger examples can be found. Like the familiar western styled chef’s knife, Gyutos are commonly tall at the heel, have a reasonably flat profile toward the heel for chopping, a belly toward the tip of the blade for rock cutting, and a pointed tip for precision work.
FREE SHIPPING for orders over R500
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Sakai Kikumori Nami – AUS10 Damascus Gyuto 210mm
Sakai Kikumori
With a passionate devotion to knife-making as well as working with some of the most skilled craftsman in Japan, Sakai Kikumori has been making cutlery of incredible quality and performance since its inception in 1926.
The Nami Petty is constructed using a core steel of AUS-10, a stainless steel with a high carbon content that is easy to sharpen and will hold a sharper edge for longer periods of time. AUS-10 is hard yet flexible making it a good compromise between edge retention and durability. The core steel is cladded in softer stainless steel with a mirror Damascus finish giving this blade its striking appearance.
Its fitted with a beautiful Octagonal Oak Handle finished with Black Japanese lacquer. The knife is light and very well balanced.
The Gyuto, an all round knife which can be used for various tasks, is the Japanese version of a chef’s knife. Gyuto’s generally have a flatter blade profile near the heel to aid in chopping, a rounder belly for rock chopping and a sharp, pointed tip for precision cutting.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Reviews
There are no reviews yet.