Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
Never twist, cleave or prise the blade.
Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
Store knives in a way that the blades will not knock into each other.
With a passionate devotion to knife-making as well as working with some of the most skilled craftsman in Japan, Sakai Kikumori has been making cutlery of incredible quality and performance since its inception in 1926.
The kikumori Nakiri is constructed using a core steel of Blue #1, a high carbon steel well known for its edge retention abilities and ease of sharpening. The blade is heat treated to 64 HRC, making it an incredibly hard blade capable of holding very fine, extremely sharp edge for prolonged periods of time. The core steel is cladded in softer Iron with a Damascus finish and the handle is made from Ho Wood with a Buffalo Horn ferrule.
The Nakiri, an under-utilised knife in Western kitchens however massively popular in Eastern kitchens, has a straight blade profile which is optimal for push cutting through vegetables and the added weight of the blade also results in it falling through food with less resistance. The Nakiri makes quick work of mountains of vegetable prep wether you are at home or in a professional setting.
Care Instructions:
Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
Never twist or cleave the blade.
Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
Store knives in a way that the blades will not knock into each other.
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied. Our knives that are produced by traditional techniques and modern industrial technology are held in the highest regard not only in Japan, but around the world.
Nakiri:
Nakiris are double bevel knives designed specifically for working with vegetables. Nakiris are characterized by their flat profiles and squared off tips. This profile makes these knives ideal for push cutting and chopping but awkward for rock cutting. Nakiris are often ground thin to optimize performance and they benefit from a refined cutting edge. A similar design is the traditional single bevel usuba which is also designed specifically for use on vegetables.
Shirogami #2 or White Carbon Steel #2:
Shirogami or White Carbon steel is one of the most pure types of carbon steel. Its made from Iron sand made in Japan.
White Carbon steel is most definitely the easiest steel to sharpen and to achieve an incredible smooth “silky” cutting edge.
These knives do however require special care as they are the most reactive of the carbon steels, after a strong patina has formed on the blade they are less likely to rust.
Knife Specifications:
Knife Shape: Nakiri
Blade Length: 165mm
Steel Type: Shirogami #2 / White Carbon # 2
Rockwell Hardness: 61:63
Handle Material: Wa (Japanese) Handle
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
We use Payfast and EFT as payment method.
Care Instructions:
Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
Never twist, cleave or prise the blade.
Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
Store knives in a way that the blades will not knock into each other.
With a passionate devotion to knife-making as well as working with some of the most skilled craftsman in Japan, Sakai Kikumori has been making cutlery of incredible quality and performance since its inception in 1926.
The Kikumori Nihonko Yo Deba is a mono-steel blade made from SK Carbon Steel. SK Rusts slower than other Japanese Carbon Steels such as Aogami and Shirogami and has notable toughness for a blade of HRC 63. The blade on this deba is thick yet easy to sharpen and will hold edges for respectable periods of time. The handle is a Western Style Handle made from Pakka Wood with a half bolster. Similar to the Single beveled Japanese Deba, the Yo Deba is its western counterpart with a double beveled blade. These knives are incredibly thick offering durability and therefore allowing these knives to be used for cutting meats with minor bones and even semi-frozen food without chipping.
Care Instructions:
Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
Never twist, cleave or prise the blade.
Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
Store knives in a way that the blades will not knock into each other.
With a passionate devotion to knife-making as well as working with some of the most skilled craftsman in Japan, Sakai Kikumori has been making cutlery of incredible quality and performance since its inception in 1926.
The Kikumori SG2 Petty is constructed using an SG2 core steel which is cladded in softer stainless steel. SG2 is a powdered steel which can hold a very fine, super sharp edge for extended periods of time due to its exceptional hardness. The stainless steel cladding not only adds to the aesthetic of the blade but also provides added resistance to corrosion. The handle is a Western Style handle with a full tang construction and is made from Brown Polywood. The petty, often referred to as a utility knife is a smaller knife used for delicate tasks such as cutting herbs as well as smaller fruits and vegetables.
Care Instructions:
Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
Never twist, cleave or prise the blade.
Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
Store knives in a way that the blades will not knock into each other.
Scanlen knives are produced locally with expert crafting techniques by Frederick Scanlen, a South African born knife artisan who, after schooling, travelled to various parts of the world to learn the art of knife making. Frederick uses all types of indigenous and exotic woods, often recycling previously used wood and utilises high quality steels for the construction of his blades.
Frederick Scanlen heat treat the steel to its highest hardness levels because he strives to maintain a good balance between edge retention, sharpness and durability. The blade is cladded in softer stainless steel which provides the knife with corrosion-resistant properties.
The handle is octagonal in shape, made from Kiaat and Walnut which is durable and incredibly comfortable in the hand.
This is a Double bevel Ko-Deba so can be used by left or right handed users. Great for filleting smaller fish and also good for using as a small all rounder knife in the kitchen.
Care Instructions:
Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
Never twist, cleave or prise the blade.
Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
Store knives in a way that the blades will not knock into each other.
Narihira knives are manufactured by Fuji Cutlery Co., Ltd.
The sister company of Tojiro applies advanced construction techniques and modern materials, combined with high quality Japanese quality control to obtain great knives suitable for chefs, home cooks and professionals at a great price.
Petty:
This knife is used for smaller jobs that are done on a cutting board. Perfect for slicing shallots, garlic, cutting herbs, and boning smaller proteins. Additionally, Petty knives are an indispensable tool for those who feel uncomfortable wielding a larger chef knife.
Molybdenum Vanadium Stainless steel:
AUS 8 is a high carbon, low chromium stainless steel that has proven, over time, to be a very good compromise between toughness, strength, edge holding and resistance to corrosion.
It has added Vanadium to give the steel more hardness. This steel is very easy to sharpen to a razor edge but it will dull relatively quickly compared to high-carbon.
Knife Specifications:
Knife Shape: Petty
Blade Length: 150 mm
Steel Type: Molybdenum Vanadium Steel
Rockwell Hardness: 59
Handle Material: Western Handle
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
We use Payfast and EFT as payment method.
Care Instructions:
Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
Never twist, cleave or prise the blade.
Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
Store knives in a way that the blades will not knock into each other.
Reviews
There are no reviews yet.