Scanlen Knives – Double Bevel Ko-Deba
R1,850.00
Scanlen
Scanlen knives are produced locally with expert crafting techniques by Frederick Scanlen, a South African born knife artisan who, after schooling, travelled to various parts of the world to learn the art of knife making. Frederick uses all types of indigenous and exotic woods, often recycling previously used wood and utilises high quality steels for the construction of his blades.
Frederick Scanlen heat treat the steel to its highest hardness levels because he strives to maintain a good balance between edge retention, sharpness and durability. The blade is cladded in softer stainless steel which provides the knife with corrosion-resistant properties.
The handle is octagonal in shape, made from Kiaat and Walnut which is durable and incredibly comfortable in the hand.
This is a Double bevel Ko-Deba so can be used by left or right handed users. Great for filleting smaller fish and also good for using as a small all rounder knife in the kitchen.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected
Out of stock
Related Products
Sale!
not rated
R5,650.00 R5,150.00
Add to cart
Tojiro DP – SET
Tojiro Knives
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied.
Our knives are produced by traditional techniques and combines modern industrial technology are held in the highest regard not only in Japan, but around the world.
The Tojiro Hammered Series features a 3-ply clad construction with a core of VG-10 super steel. This formula of steel results in 60 Rockwell Hardness and provides a 9-12 degree blade angle for scalpel-like sharpness.
The handle is made from Japanese magnolia, which has a smooth texture and is moisture-resistant. The closed rein collar allows for full and complete sharpening of the blade. Each knife is hand-finished by an artisan craftsman.
This set includes the following:
Tojiro DP – Gyuto 210mm
Tojiro DP – Santoku 170mm
Tojiro DP – Petty 150mm
FREE SHIPPING for orders over R850
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Naniwa Traditional Stone 1000 Grit
TOUSHU MV Deba 165mm
TOUSHU
TOUSHU knives are manufactured by Fuji Cutlery Co., Ltd. The sister company of Tojiro applies advanced construction techniques and modern materials, combined with high quality Japanese quality control to produce great knives suitable for chefs, home cooks and professionals at a great price
Deba:
The Deba is one of the first knives a sushi chef would use when preparing fish. Mainly used for filleting fish but can also be used for doing some poultry work.
These knives, and a considerable amount of skill on the chefs part, are the reason sushi looks so good and why the fish is cleaned so perfectly. Done properly, the bones will be in one pile with almost no meat on them and the meat will be completely bone-free, perfect fillets.
Most debas are single bevel meaning the knife is ground on one side only and the back side of the knife is flat. Single bevels knives have more acute angles on their edges that excel at cutting softer, thinner product like fish but in return require a different skill set to use and sharpen.
Molybdenum Vanadium Stainless steel:
AUS 8 is a high carbon, low chromium stainless steel that has proven, over time, to be a very good compromise between toughness, strength, edge holding and resistance to corrosion.
It has added Vanadium to give the steel more hardness. This steel is very easy to sharpen to a razor edge but it will dull relatively quickly compared to high-carbon.
Delivery time: 2 to 4 Working days
FREE SHIPPING for orders over R850
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Slant Wood Walnut Magnetic Knife Holder
Slant Wood Walnut Magnetic Knife Holder
A Magnetic Knife Holder is an excellent choice when considering storage options for your knives. They can be easily mounted on most surfaces and offers safe storage for your knives in the sense that they will, depending on where you mount it, elevated your knives keeping it from children and pets as well as preventing your knives from clashing against each other causing them to scratch and dull more quickly. Additional benefits of a Magnetic Knife Holder includes freeing up drawer and counter space as well as offering a display for one to show off the beauty of ones knives.
This particular Magnetic Knife Holder is handmade locally by Slant wood and is constructed using a strong magnet encased in beautiful Walnut.
Disclaimer – The knives presented in the photo is not included with the Knife Holder.
Installation:
https://www.youtube.com/watch?v=GGK4WQ1qSYk
Sale!
not rated
R6,400.00 R6,080.00
Read more
Nigara SG2 – Gyuto Kiritsuke 210mm
Nigara knives
Nigara Knives are produced in a northern region in Japan which was and still is home to many skilful Blacksmiths that made various weapons and tools that date back 350 years. After WWII, sword-making was banned and many blacksmiths had to start producing cutlery and gardening tools. Nigara knives thus started manufacturing chefs knives of various shapes and sizes with exceptional quality and materials whilst still utilising the traditional crafting methods used throughout their rich history.
The Nigara 210mm Kiritsuke is constructed using an SG2 core steel which is cladded in softer stainless steel. SG2 is a powdered steel which can hold a very fine, Super sharp edge for prolonged periods of time, due to its exceptional hardness. The stainless steel cladding sports a beautiful Tsuchime finish which gives this knife its beautiful aesthetic and aids in preventing corrosion. The stunning octagonal handle is made from Wenge with a Buffalo Horn ferrule and is incredibly durable and comfortable in the hand. The Kiritsuke is another example of a multipurpose knife as it can be used for both boneless meats and vegetables. It has a straighter edge profile which makes push cutting and chopping a breeze whilst the longer blade allows for efficient slicing.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Takamura Akagouhan – Gyuto 210mm R2
Terukazu Takamura’s knives are known to be refined with a super sharp long lived edge. They have gained recognition worldwide by chefs and even ranked #1 in a consumer test report by Smarson in Sweden, beating out every “top of the line” European knife in the running. His knives are a favorite of Noma’s Rene Redzepi and definitely a Kitchen Samurai favorite!
The Takamura Akagouhan Line is made from a R2 Powdered steel that keeps a super sharp edge for a long time between sharpening. R2 is a high speed powder stainless steel made by Takefu Special steel Co. Ltd. For some knife makers, this is a ideal for knife making like Takamura-san. It has great hardness of greater than 63 HR. This steel has great edge retention, high wear resistance and is stainless. The grains are so fine and uniform that hammer forging is not necessary.
Gyuto (Chefs Knife):
The Gyuto is a Japanese designed chef’s knife. Gyutos vary widely in design but generally range from 210mm to 270mm in length though smaller and larger examples can be found. Like the familiar western styled chef’s knife, Gyutos are commonly tall at the heel, have a reasonably flat profile toward the heel for chopping, a belly toward the tip of the blade for rock cutting, and a pointed tip for precision work.
.
Knife Specifications
Knife Type: Gyuto
Material: R2 Powder Steel
Blade Length: 210mm
Rockwell Hardness: 63
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R850
We use Payfast and EFT as payment method.
Tadafusa SAN – Hiraki 165mm
165mm Hiraki Nashiji
Manufactured in Niigata City, an area famed for producing tools and knives of exceptional quality as well as the finest Sake in Japan, Tadafusa knives spares no expense when it comes the best quality materials and craftsmanship. Their knives offers fantastic performance and ergonomics catering to both home cooks and industry professionals.
The Tadafusa 165mm Nashiji Hiraki is constructed using a Blue Paper core steel which is a high end, high carbon steel which can be heat treated to extremely high hardness levels meaning it can take on finer, sharper edges and maintain these edges for prolonged periods of time. The core steel is cladded in softer stainless steel with a rustic Nashiji finish which not only adds to the aesthetic of the blade but also aids in preventing corrosion. Made from thermally treated Chestnut with a black ferrule, the octagonal Wa handle is both comfortable and durable. The Hiraki, although referred to as a Shellfish paring knife, is commonly used to filet fish and the very meaning of Hiraki refers to the technique of filleting and butterflying fish.
Blade Length:165mm
HRC: 63
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Tojiro – Hammered Kurouchi Nakiri
Tojiro Knives
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied.
Our knives are produced by traditional techniques and combines modern industrial technology are held in the highest regard not only in Japan, but around the world.
The Tojiro Hammered Series features a 3-ply clad construction with a core of VG-10 super steel. This formula of steel results in 60 Rockwell Hardness and provides a 9-12 degree blade angle for scalpel-like sharpness.
The handle is made from Japanese magnolia, which has a smooth texture and is moisture-resistant. The closed rein collar allows for full and complete sharpening of the blade. Each knife is hand-finished by an artisan craftsman.
Tojiro is exclusively distributed in South Africa by Kitchen Samurai.
About the Nakiri
Under-utilized in the western kitchen, the Nakiri’s flat blade is meant for the push/pull chopping of vegetables. Since the entire flat edge of the knife touches the cutting board at once, you won’t be turning the vegetable into an ‘accordion’, pieces that are still connected by a thread after you’ve cut them.
The added weight of the blade allow it to fall through food more easily while you chop, so the knife does more of the work for you.
The Nakiri blade shape is a traditional Japanese knife shape, designed for the task of cutting vegetables – a knife that will be appreciated in the hands of a prep cook with mountains of veggies to prepare every day.
Recently, many Nakiris find their way into home kitchens – it’s a perfect knife for vegetarians and veggie lovers.
FREE SHIPPING for orders over R500
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Tadafusa HK 2 – Santoku 170 mm
Tadafusa
Tadafusa was founded in 1948 in Sanjo, Niigata Prefecture. They began by making various tools including sickles, short swords and fishing knives, they have moved to specialize in kitchen knives.
The Blade is made for SLD Steel by Hitachi. The SLD Steel is cladded with Softer Stainless steel.
The handle is made with a semi-charcoaled chestnut wood handle that helps with corrosion and durability.
HRC 60-62
Santoku:
This is also a multi-purpose knife, but with a slight vegetable bias. Santoku means ‘Three Virtues’ or ‘To solve Three Problems’. The virtues or problems are slicing, dicing and mincing. Santoku is usually found in 160mm – 190mm lengths. These are more and more popular in Western kitchens due to the unique shape and smaller easy to handle size.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Reviews
There are no reviews yet.