Scanlen knives are produced locally with expert crafting techniques by Frederick Scanlen, a South African born knife artisan who, after schooling, travelled to various parts of the world to learn the art of knife making. Frederick uses all types of indigenous and exotic woods, often recycling previously used wood and utilises high quality steels for the construction of his blades.
The Gyuto is constructed San Mai (Three Layer Construction) using UHC, an ultra high carbon steel which, due to its high carbon content, can be heat treated to high hardness levels.
Frederick Scanlen heat treat the steel to its highest hardness levels because he strives to maintain a good balance between edge retention, sharpness and durability. The blade is cladded in softer stainless steel which provides the knife with corrosion resistant properties.
The handle is octagonal in shape, made from Kiaat and Walnut which is durable and incredibly comfortable in the hand. The Gyuto, an all round knife which can be used for various tasks, is the Japanese version of a chef’s knife. Gyuto’s generally have a flatter blade profile near the heel to aid in chopping, a rounder belly for rock chopping and a sharp, pointed tip for precision cutting.
Care Instructions:
Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
Never twist or cleave the blade.
Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
Store knives in a way that the blades will not knock into each other.
The Naniwa – 24 Grit Flattening Stone produces extremely flat results on all water stones, ceramic or traditional.
Always make sure the flattening stone is wet before use. This large flattening stone comes with rubber feet for grip while running the dished whetstone across the flattening stone.
This stone is Extra coarse for a super fast flattening experience. We use these because of the high volume of hand sharpening. The stone cuts quickly, but can leave fine grooves in the higher grit stones, which should be smoothed with your dressing stone. For persons doing a more normal volume of sharpening, the large 24 grit provides the benefit of truer flat without the grooving, it just takes longer.
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied. Our knives that are produced by traditional techniques and modern industrial technology are held in the highest regard not only in Japan, but around the world.
Deba:
The Deba is one of the first knives a sushi chef would use when preparing fish. Mainly used for filleting fish but can also be used for doing some poultry work.
These knives, and a considerable amout of skill on the chefs part, are the reason sushi looks so good and why the fish is cleaned so perfectly. Done properly, the bones will be in one pile with almost no meat on them and the meat will be completely bone-free, perfect fillets.
Most debas are single bevel meaning the knife is ground on one side only and the back side of the knife is flat. Single bevels knives have more acute angles on their edges that excel at cutting softer, thinner product like fish but in return require a different skill set to use and sharpen.
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
We use Payfast and EFT as payment method.
Care Instructions:
Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
Never twist, cleave or prise the blade.
Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
Store knives in a way that the blades will not knock into each other.
Tojiro Knives
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied.
Our knives are produced by traditional techniques and combines modern industrial technology are held in the highest regard not only in Japan, but around the world.
The Tojiro Hammered Series features a 3-ply clad construction with a core of VG-10 super steel. This formula of steel results in 60 Rockwell Hardness and provides a 9-12 degree blade angle for scalpel-like sharpness.
The handle is made from Japanese magnolia, which has a smooth texture and is moisture-resistant. The closed rein collar allows for full and complete sharpening of the blade. Each knife is hand-finished by an artisan craftsman.
Tojiro is exclusively distributed in South Africa by Kitchen Samurai.
About the Petty
“Petty” is the Japanese word for a paring or utility knife and comes from the French word “petite”. It’s perfect for hand peeling fruits and veggies, but also equally as handy for small work on a cutting board.
If you feel uncomfortable with large knives, start with this shape. You really can get a lot done with a 120mm or 150mm petty knife.
Petty knives can be as small as 75mm and as large as 180mm, so there’s something to fit any hand, big or small.
FREE SHIPPING for orders over R500
Care Instructions:
Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
Never twist, cleave or prise the blade.
Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
Store knives in a way that the blades will not knock into each other.
Kurosaki-san started as a blacksmith at a very young age, starting working at Takefu knife village at the age of 17 and apprenticed under Hiroshi Kato and Katsushige Anryu and ended up as the youngest master blacksmith at Takefu knife village.
His knives are renowned world wide for there unique look and amazing performance!
Santoku:
This is also a multi-purpose knife, but with a slight vegetable bias. Santoku means ‘Three Virtues’ or ‘To solve Three Problems’. The virtues or problems are slicing, dicing and mincing. Santoku is usually found in 160mm – 190mm lengths. These are more and more popular in Western kitchens due to the unique shape and smaller easy to handle size.
SG2/R2 Stainless Steel:
SG2 (Super Gold 2 or R2) is a micro carbide powder stainless steel, one of the hardest blade steel in the world, which provides excellent rust resistance and a long-lasting edge and amazing sharpness.
Knife Specifications:
Knife Shape: Santoku
Blade Length: 165mm
Steel Type: SG2/R2 Stainless
Rockwell Hardness: 63
Handle Material: Wa (Japanese) Walnut Handle
https://youtu.be/l60zBSF9qwY
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
Care Instructions:
Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
Never twist, cleave or prise the blade.
Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
Store knives in a way that the blades will not knock into each other.
Yoshimi Kato first apprenticed at Kanehiro Hamono and then apprenticed under the guidance of Hiroshi-San (his Father in Law) who has also taught great blacksmiths like Yu Kurosaki. Yoshimi Kato strives to continuously improve his skills day by day working from Takefu knife village.
Bunka:
Bunka knives are general purpose knives tackling a wide range of common kitchen tasks. Their reverse tanto profile gives the knives a dexterous and delicate tip and a unique and eye-catching aesthetic. These can be used any time a Gyuto or santoku might be called for. Since Banno Bunkas have fairly flat profiles they are most adept at push cutting and chopping rather than rock chopping.
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
We use Payfast and EFT as payment method.
Care Instructions:
Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
Never twist, cleave or prise the blade.
Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
Store knives in a way that the blades will not knock into each other.
not rated
not rated
Reviews
There are no reviews yet.