Tojuro – Gyuto 180mm
R950.00
Tojuro knives are manufactured by Fuji Cutlery Co., Ltd.
The sister company of Tojiro applies advanced construction techniques and modern materials, combined with high quality Japanese quality control to obtain great knives suitable for chefs, home cooks and professionals at a great price.
Gyuto (Chefs Knife):
The Gyuto is a Japanese designed chef’s knife. Gyutos vary widely in design but generally range from 180mm to 270mm in length though smaller and larger examples can be found. Like the familiar western styled chef’s knife, Gyutos are commonly tall at the heel, have a reasonably flat profile toward the heel for chopping, a belly toward the tip of the blade for rock cutting, and a pointed tip for precision work.
Molybdenum Vanadium Stainless steel:
AUS 8 is a high carbon, low chromium stainless steel that has proven, over time, to be a very good compromise between toughness, strength, edge holding and resistance to corrosion.
It has added Vanadium to give the steel more hardness. This steel is very easy to sharpen to a razor edge but it will dull relatively quickly compared to high-carbon.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
In stock
Related Products
Takamura R2 – Petty 150mm
Terukazu Takamura’s knives are known to be refined with a super sharp long lived edge. They have gained recognition worldwide by chefs and even ranked #1 in a consumer test report by Smarson in Sweden, beating out every “top of the line” European knife in the running.
The Takamura Akagouhan Line is made from a R2 Powdered steel that keeps a super sharp edge for a long time between sharpening. R2 is a high speed powder stainless steel made by Takefu Special steel Co. Ltd. For some knife makers, this is a ideal for knife making like Takamura-san. It has great hardness of greater than 63 HR. This steel has great edge retention, high wear resistance and is stainless. The grains are so fine and uniform that hammer forging is not necessary.
Petty:
This knife is used for smaller jobs that are done on a cutting board. Perfect for slicing shallots, garlic, cutting herbs, and boning smaller proteins. Additionally, Petty knives are an indispensable tool for those who feel uncomfortable wielding a larger chef knife.
Knife Specifications:
Knife Shape: Petty
Blade Length: 150mm
Steel Type: R2 Powdered Stainless Steel
Rockwell Hardness: 63
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Sakai Kikumori Nami – AUS10 Damascus Gyuto 210mm
Sakai Kikumori
With a passionate devotion to knife-making as well as working with some of the most skilled craftsman in Japan, Sakai Kikumori has been making cutlery of incredible quality and performance since its inception in 1926.
The Nami Petty is constructed using a core steel of AUS-10, a stainless steel with a high carbon content that is easy to sharpen and will hold a sharper edge for longer periods of time. AUS-10 is hard yet flexible making it a good compromise between edge retention and durability. The core steel is cladded in softer stainless steel with a mirror Damascus finish giving this blade its striking appearance.
Its fitted with a beautiful Octagonal Oak Handle finished with Black Japanese lacquer. The knife is light and very well balanced.
The Gyuto, an all round knife which can be used for various tasks, is the Japanese version of a chef’s knife. Gyuto’s generally have a flatter blade profile near the heel to aid in chopping, a rounder belly for rock chopping and a sharp, pointed tip for precision cutting.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Tojiro Gai – Gyuto 180mm
Tojiro Knives
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied. Our knives that are produced by traditional techniques and modern industrial technology are held in the highest regard not only in Japan, but around the world.
The new Gai range from Tojiro is made from 37 layers Damascus VG10 stainless. VG10, a cutlery grade stainless steel produced in Japan. It has a high carbon content which allows it to be heat treated to higher hardness levels thus allowing the blade to take on finer, sharper edges whilst being able to maintain that edge for prolonged periods of time.
The Handle is inspired by the Japanese word Gai, which is roughly translated from the Japanese word for armour. Made from Linen mikarta which is durable, corrosion resistance, and strong against degradation over time. The convex edge of the Gai series cuts effortlessly into food and holds a very good edge.
Gyuto
The Gyuto, an all round knife which can be used for various tasks, is the Japanese version of a chef’s knife. Gyuto’s generally have a flatter blade profile near the heel to aid in chopping, a rounder belly for rock chopping and a sharp, pointed tip for precision cutting.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
RYUTOKU Nakiri 160mm
RYUTOKU
RYUTOKU knives are manufactured by Fuji Cutlery Co., Ltd. The sister company of Tojiro applies advanced construction techniques and modern materials, combined with high quality Japanese quality control to produce great knives suitable for chefs, home cooks and professionals at a great price.
About the Nakiri
Under-utilized in the western kitchen, the Nakiri’s flat blade is meant for the push/pull chopping of vegetables. Since the entire flat edge of the knife touches the cutting board at once, you won’t be turning the vegetable into an ‘accordion’, pieces that are still connected by a thread after you’ve cut them.
The added weight of the blade allow it to fall through food more easily while you chop, so the knife does more of the work for you.
The Nakiri blade shape is a traditional Japanese knife shape, designed for the task of cutting vegetables – a knife that will be appreciated in the hands of a prep cook with mountains of veggies to prepare every day.
Recently, many Nakiris find their way into home kitchens – it’s a perfect knife for vegetarians and veggie lovers.
FREE SHIPPING for orders over R850
Delivery time: 2 to 4 Working days
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Sakai Kikumori Nihonko – Gyuto 210mm
Sakai Kikumori
With a passionate devotion to knife-making as well as working with some of the most skilled craftsman in Japan, Sakai Kikumori has been making cutlery of incredible quality and performance since its inception in 1926.
The Kikumori Nihonko Gyuto is a mono-steel blade made from SK Carbon Steel. SK Rusts slower than other Japanese Carbon Steels such as Aogami and Shirogami and has notable toughness for a blade of HRC 63. The blade is thin and easy to sharpen and will hold edges for respectable periods of time. The handle is a Western Style Handle made from Pakka Wood with a half bolster. The Gyuto, an all round knife which can be used for various tasks, is the Japanese version of a chef’s knife. Gyuto’s generally have a flatter blade profile near the heel to aid in chopping, a rounder belly for rock chopping and a sharp, pointed tip for precision cutting.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Narihira – Santoku 165mm
Narihira
Narihira knives are manufactured by Fuji Cutlery Co., Ltd.
The sister company of Tojiro applies advanced construction techniques and modern materials, combined with high quality Japanese quality control to obtain great knives suitable for chefs, home cooks and professionals at a great price.
Santoku:
This is also a multi-purpose knife, but with a slight vegetable bias. Santoku means ‘Three Virtues’ or ‘To solve Three Problems’. The virtues or problems are slicing, dicing and mincing. Santoku is usually found in 160mm – 190mm lengths. These are more and more popular in Western kitchens due to the unique shape and smaller easy to handle size.
Molybdenum Vanadium Stainless steel:
AUS 8 is a high carbon, low chromium stainless steel that has proven, over time, to be a very good compromise between toughness, strength, edge holding and resistance to corrosion.
It has added Vanadium to give the steel more hardness. This steel is very easy to sharpen to a razor edge but it will dull relatively quickly compared to high-carbon.
Knife Specifications:
Knife Shape: Santoku
Blade Length: 165mm
Steel Type: Molybdenum Vanadium Steel
Rockwell Hardness: 59
Handle Material: Western Handle
Delivery time: 3 to 4 Working days
FREE SHIPPING for orders over R850
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Sakai Kikumori AUS10 – Wa-Gyuto 210mm
Sakai Kikumori
With a passionate devotion to knife-making as well as working with some of the most skilled craftsman in Japan, Sakai Kikumori has been making cutlery of incredible quality and performance since its inception in 1926.
The Kikumori Hammered Damascus Wa-Gyuto is constructed using a core steel of AUS-10, a stainless steel with a high carbon content that is easy to sharpen and will hold a sharper edge for longer periods of time. AUS-10 is hard yet flexible making it a good compromise between edge retention and durability. The core steel is cladded in softer stainless steel with a polished hammered and Damascus finish giving this blade its striking appearance and aids in further preventing corrosion. The handle is octagonal in shape made from magnolia with a buffalo horn ferrule. The Gyuto, an all round knife which can be used for various tasks, is the Japanese version of a chef’s knife. Gyuto’s generally have a flatter blade profile near the heel to aid in chopping, a rounder belly for rock chopping and a sharp, pointed tip for precision cutting.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Reviews
There are no reviews yet.