Yoshimi Kato Nashiji – Gyuto 210mm
R4,750.00
Yoshimi Kato first apprenticed at Kanehiro Hamono and then apprenticed under the guidance of Hiroshi-San (his Father in Law) who has also taught great blacksmiths like Yu Kurosaki. Yoshimi Kato strives to continuously improve his skills day by day working from Takefu knife village.
Aogami Super Steel:
The blade is made from Aogami Super – really easy to sharpen, holds a super fine edge, cuts like silk and is very rugged for its hardness. The super hard steel is then cladded in a softer stainless steel to help lower the possibility of rusting.
Gyuto (Chefs Knife):
The Gyuto is a Japanese designed chef’s knife. Gyutos vary widely in design but generally range from 210mm to 270mm in length though smaller and larger examples can be found. Like the familiar western styled chef’s knife, Gyutos are commonly tall at the heel, have a reasonably flat profile toward the heel for chopping, a belly toward the tip of the blade for rock cutting, and a pointed tip for precision work.
Knife Specifications:
Knife Shape: Gyuto
Blade Length: 210mm
Steel Type: Aogami Super
Rockwell Hardness: 63:64
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
We use Payfast and EFT as payment method.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Only 2 left in stock
Related Products
Masakage Koishi – 165mm Nakiri
Masakage Koishi:
The blade is made from Aogami Super – really easy to sharpen, holds a super fine edge, cuts like silk and is very rugged for its hardness. The super hard steel is then cladded in a softer stainless steel to help lower the possibility of rusting.
The Koishi(Pebble) line is made by Yoshimi Kato who first apprenticed at Kanehiro Hamono and then apprenticed under the guidance of Hiroshi-San (his Father in Law) who has also taught great blacksmiths like Yu Kurosaki. Yoshimi Kato strives to continuously improve his skills day by day working from Takefu knife village.
Nakiri:
Nakiris are double bevel knives designed specifically for working with vegetables. Nakiris are characterized by their flat profiles and squared off tips. This profile makes these knives ideal for push cutting and chopping but awkward for rock cutting. Nakiris are often ground thin to optimize performance and they benefit from a refined cutting edge. A similar design is the traditional single bevel usuba which is also designed specifically for use on vegetables.
Knife Specifications:
Knife Shape: Nakiri
Blade Length: 165mm
Steel Type: Aogami Super with Stainless Glad
Rockwell Hardness: 63:64
Handle Material: Wa (Japanese) Handle, Octagon Cherry wood handle with Pakka wood collar
Delivery time: 3 to 5 Working days
FREE DELIVERY ACROSS SOUTH AFRICA
We use Payfast and EFT as payment method.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Tojiro DP – Nakiri 165mm
Tojiro Knives
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied. Our knives that are produced by traditional techniques and modern industrial technology are held in the highest regard not only in Japan, but around the world.
Nakiri:
Nakiris are double bevel knives designed specifically for working with vegetables. Nakiris are characterized by their flat profiles and squared off tips. This profile makes these knives ideal for push cutting and chopping but awkward for rock cutting. Nakiris are often ground thin to optimize performance and they benefit from a refined cutting edge. A similar design is the traditional single bevel usuba which is also designed specifically for use on vegetables.
VG10 Stainless
The blade is made from VG10 Stainless. Its a very popular stainless steel for knife makers in Japan. It is produced by Takefu Special steel Co. Ltd. VG10 is specifically designed for kitchen knife making. Its’s relatively easy to work, has great edge retention, hardness and ductility. VG10 is usually hardened to 60-61 HRC.
Knife Specifications:
Knife Shape: Nakiri
Blade Length: 165mm
Steel Type: VG10 Stainless
Rockwell Hardness: 60:61
Handle Material: Wa (Japanese) Handle
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
We use Payfast and EFT as payment method.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Sale!
not rated
R2,250.00 R1,850.00
Add to cart
Kaishin Migaki – Kiritsuke 150mm
Kaishin
Kaishin knives are forged by a small group of blacksmiths in Tosa city, Japan. These knives are great value for money. Made from beautiful steel they have a rustic feel and are quite light even when compared to other Japanese knives.
Kiritsuke:
Traditionally a single bevel knife, but most modern Kiritsuke knives are now double beveled, miking it functional for both lef-handed and right-handed users.
The Kiritsuke profile is often quite flat, offering great contact with your cutting board.
It also offers a thin drop tip, which is great for precision work and getting into those nooks and crannies.
Knife Specifications:
Knife Shape: Kiritsuke
Blade Length: 150 mm
Steel Type: Aogami # 2 ( Blue Paper # 2 )
Rockwell Hardness: 61:63
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
We use Payfast and EFT as payment method.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Tojiro DP – Gyuto 210mm
Tojiro Knives
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied. Our knives that are produced by traditional techniques and modern industrial technology are held in the highest regard not only in Japan, but around the world.
Gyuto (Chefs Knife):
The Gyuto is a Japanese designed chef’s knife. Gyutos vary widely in design but generally range from 210mm to 270mm in length though smaller and larger examples can be found. Like the familiar western styled chef’s knife, Gyutos are commonly tall at the heel, have a reasonably flat profile toward the heel for chopping, a belly toward the tip of the blade for rock cutting, and a pointed tip for precision work.
VG10 Stainless
The blade is made from VG10 Stainless. Its a very popular stainless steel for knife makers in Japan. It is produced by Takefu Special steel Co. Ltd. VG10 is specifically designed for kitchen knife making. Its’s relatively easy to work, has great edge retention, hardness and ductility. VG10 is usually hardened to 60-61 HRC.
Knife Specifications:
Knife Shape: Gyuto
Blade Length: 210mm
Steel Type: VG10 Stainless
Rockwell Hardness: 60:61
Handle Material: Wa (Japanese) Handle
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
We use Payfast and EFT as payment method.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Masakage Mizu – Sujihiki 270mm
Masakage Mizu:
Masakage Mizu Collection is handmade by Anryu san. Knifemaking is in Anryu san’s blood. His family started as knives makers in the early 1870’s. He started apprenticing as a knife maker under his father, Katsutoshi Anryu, after graduating high school in 1959. He is a fourth generation knife maker and has been working as a blacksmith for well over 50 years.
The Blade of the Masakage Mizu is super thin and cuts like a razor. The Hard Aogami #2 steel is laminated between softer layers
of carbon steel.
These knives have been named Mizu (water) as the blue/black Kurochi finish gives the impression of cold, deep water. Paired with an oval cherry wood handle these knives represent excellent bang for the buck.
Because the blade is not stainless it requires a bit more care. Keep the blade dry to avoid tarnish
and if you ever see a bit of rust on the blade remove it immediately with a coarse dish scrubber and soapy water.
You can also purchase a Sabitoru Rust Eraser and Camellia oil for maintenance.
Sujihiki:
Sujihikis can be seen in one of two ways: first, as analogs to the familiar western styled slicer; or second, as a western styled, double bevel version of the single bevel Yanagiba famously used for preparing sushi. Sujihiki Slicers commonly range from 240mm to 300mm.
Knife Specifications:
Knife Shape: Sujihiki
Blade Length: 270mm
Steel Type: Aogami # 2 (Blue Steel # 2)
Rockwell Hardness: 61:63
Handle Material: Wa (Japanese) Handle, Oval Cherry wood handle with a plastic collar
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
We use Payfast and EFT as payment method.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, Arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Tojiro DP – Kiritsuke 160mm
Tojiro Knives
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied. Our knives that are produced by traditional techniques and modern industrial technology are held in the highest regard not only in Japan, but around the world.
Kiritsuke:
Traditionally a single bevel knife, but most modern Kiritsuke knives are now double beveled, miking it functional for both lef-handed and right-handed users.
The Kiritsuke profile is often quite flat, offering great contact with your cutting board.
It also offers a thin drop tip, which is great for precision work and getting into those nooks and crannies.
VG10 Stainless
The blade is made from VG10 Stainless. Its a very popular stainless steel for knife makers in Japan. It is produced by Takefu Special steel Co. Ltd. VG10 is specifically designed for kitchen knife making. Its’s relatively easy to work, has great edge retention, hardness and ductility. VG10 is usually hardened to 60-61 HRC.
Knife Specifications:
Knife Shape: Kiritsuke
Blade Length: 160mm
Steel Type: VG10 Stainless
Rockwell Hardness: 60:61
Handle Material: Western Handle
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
We use Payfast and EFT as payment method.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Sale!
not rated
R625.00 R395.00
Read more
Saya Knife Cover – Gyuto 210mm
The design of the Japanese saya cover has not changed much for hundreds of years. Japanese Magnolia wood is traditionally used for these covers as it does a great job protecting the blade. Its soft, moisture-resistant and contains no strong resins that might cause corrosion in high carbon steel.
Please note that each product my vary in appearance because of the Magnolia wood used for the saya Covers. The saya you receive will be unique and slightly different from the image.
- Each wooden saya covers fit varies slightly due to the natural factors (humidity, dryness etc.), also each knife shape is unique, your knife may not fit this wooden saya. To purchase saya for knives you own, please bring your knives in to the JPN Concept Store in Salt River, Cape Town. We will personally fit your knife with a saya.
- Our Magnolia Wood Saya covers fits the following knives on our online shop – Katsushige Anryu – Kurouchi – Gyuto 210mm, Masakage Mizu – Gyuto 210mm, Takamura – Gyuto 210mm, Tojiro Color – Gyuto 210mm, Tojiro Shirogami – Gyuto 210mm
- Kitchen Samurai does not accept returns, exchanges or refunds of saya covers. All sales of saya covers are final.
FREE SHIPPING for orders over R500
Narihira – Yanagiba 270mm
Narihira
Narihira knives are manufactured by Fuji Cutlery Co., Ltd.
The sister company of Tojiro applies advanced construction techniques and modern materials, combined with high quality Japanese quality control to obtaingreat knives suitable for chefs, home cooks and professionals at a great price.
Yanagiba:
The Yanagiba is like a carving knife on rocket boosters. It slips through food effortlessly and crazy sharpness of the single edge means you will never struggle. Its a true gateway knife for people wanting to get into single bevel knives and learn some cool tricks. When slicing with a yanagiba the blade will naturally want to pull to the left on a right handed knife. (The opposite is true for is true for a lefty. ) As the driver of the blade, you must take control and tell it where to go. Sounds tricky, but you will get the hang of it after a while. Still the Yanagiba can take years to master.
This is a true slicing machine for people who love excellence.
Molybdenum Vanadium Stainless steel:
AUS 8 is a high carbon, low chromium stainless steel that has proven, over time, to be a very good compromise between toughness, strength, edge holding and resistance to corrosion.
It has added Vanadium to give the steel more hardness. This steel is very easy to sharpen to a razor edge but it will dull relatively quickly compared to high-carbon.
Knife Specifications:
Knife Shape: Yanagiba
Blade Length: 270 mm
Steel Type: Molybdenum Vanadium Steel
Rockwell Hardness: 59
Handle Material: Traditional Japanese Handle
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
We use Payfast and EFT as payment method.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Reviews
There are no reviews yet.