Scanlen – Petty
R1,750.00
In stock
Related Products
Takamura R2 – Petty 150mm
Terukazu Takamura’s knives are known to be refined with a super sharp long lived edge. They have gained recognition worldwide by chefs and even ranked #1 in a consumer test report by Smarson in Sweden, beating out every “top of the line” European knife in the running.
The Takamura Akagouhan Line is made from a R2 Powdered steel that keeps a super sharp edge for a long time between sharpening. R2 is a high speed powder stainless steel made by Takefu Special steel Co. Ltd. For some knife makers, this is a ideal for knife making like Takamura-san. It has great hardness of greater than 63 HR. This steel has great edge retention, high wear resistance and is stainless. The grains are so fine and uniform that hammer forging is not necessary.
Petty:
This knife is used for smaller jobs that are done on a cutting board. Perfect for slicing shallots, garlic, cutting herbs, and boning smaller proteins. Additionally, Petty knives are an indispensable tool for those who feel uncomfortable wielding a larger chef knife.
Knife Specifications:
Knife Shape: Petty
Blade Length: 150mm
Steel Type: R2 Powdered Stainless Steel
Rockwell Hardness: 63
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Yu Kurosaki Shizuku – Santoku 165mm
Yu Kurosaki
Kurosaki-san started as a blacksmith at a very young age, starting working at Takefu knife village at the age of 17 and apprenticed under Hiroshi Kato and Katsushige Anryu and ended up as the youngest master blacksmith at Takefu knife village.
His knives are renowned world wide for there unique look and amazing performance!
Santoku:
This is also a multi-purpose knife, but with a slight vegetable bias. Santoku means ‘Three Virtues’ or ‘To solve Three Problems’. The virtues or problems are slicing, dicing and mincing. Santoku is usually found in 160mm – 190mm lengths. These are more and more popular in Western kitchens due to the unique shape and smaller easy to handle size.
SG2/R2 Stainless Steel:
SG2 (Super Gold 2 or R2) is a micro carbide powder stainless steel, one of the hardest blade steel in the world, which provides excellent rust resistance and a long-lasting edge and amazing sharpness.
Knife Specifications:
Knife Shape: Santoku
Blade Length: 165mm
Steel Type: SG2/R2 Stainless
Rockwell Hardness: 63
Handle Material: Wa (Japanese) Walnut Handle
https://youtu.be/l60zBSF9qwY
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Tojiro Shirogami Mini Deba 120mm
Tojiro Knives
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied. Our knives that are produced by traditional techniques and modern industrial technology are held in the highest regard not only in Japan, but around the world.
Deba:
The Deba is one of the first knives a sushi chef would use when preparing fish. Mainly used for filleting fish but can also be used for doing some poultry work.
These knives, and a considerable amout of skill on the chefs part, are the reason sushi looks so good and why the fish is cleaned so perfectly. Done properly, the bones will be in one pile with almost no meat on them and the meat will be completely bone-free, perfect fillets.
Most debas are single bevel meaning the knife is ground on one side only and the back side of the knife is flat. Single bevels knives have more acute angles on their edges that excel at cutting softer, thinner product like fish but in return require a different skill set to use and sharpen.
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
We use Payfast and EFT as payment method.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Tojiro Gai – Santoku 170mm
Tojiro Knives
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied. Our knives that are produced by traditional techniques and modern industrial technology are held in the highest regard not only in Japan, but around the world.
The new Gai range from Tojiro is made from 37 layers Damascus VG10 stainless. VG10, a cutlery grade stainless steel produced in Japan. It has a high carbon content which allows it to be heat treated to higher hardness levels thus allowing the blade to take on finer, sharper edges whilst being able to maintain that edge for prolonged periods of time.
The Handle is inspired by the Japanese word Gai, which is roughly translated from the Japanese word for armour. Made from Linen mikarta which is durable, corrosion resistance, and strong against degradation over time. The convex edge of the Gai series cuts effortlessly into food and holds a very good edge.
Santoku
The Santoku is a multi-purpose knife with a blade profile that allows for great versatility and due to this as well as its smaller form factor, it has become very popular in Western kitchens.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Sakai Kikumori Nihonko – Petty 150mm
Sakai Kikumori
With a passionate devotion to knife-making as well as working with some of the most skilled craftsman in Japan, Sakai Kikumori has been making cutlery of incredible quality and performance since its inception in 1926.
The Kikumori Nihonko Gyuto is a mono-steel blade made from SK Carbon Steel. SK Rusts slower than other Japanese Carbon Steels such as Aogami and Shirogami and has notable toughness for a blade of HRC 63. The blade is thin and easy to sharpen and will hold edges for respectable periods of time. The handle is a Western Style Handle made from Pakka Wood with a half bolster.
Petty:
This knife is used for smaller jobs that are done on a cutting board. Perfect for slicing shallots, garlic, cutting herbs, and boning smaller proteins. Additionally, Petty knives are an indispensable tool for those who feel uncomfortable wielding a larger chef knife.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Sale!
not rated
R6,400.00 R6,080.00
Read more
Nigara SG2 – Gyuto Kiritsuke 210mm
Nigara knives
Nigara Knives are produced in a northern region in Japan which was and still is home to many skilful Blacksmiths that made various weapons and tools that date back 350 years. After WWII, sword-making was banned and many blacksmiths had to start producing cutlery and gardening tools. Nigara knives thus started manufacturing chefs knives of various shapes and sizes with exceptional quality and materials whilst still utilising the traditional crafting methods used throughout their rich history.
The Nigara 210mm Kiritsuke is constructed using an SG2 core steel which is cladded in softer stainless steel. SG2 is a powdered steel which can hold a very fine, Super sharp edge for prolonged periods of time, due to its exceptional hardness. The stainless steel cladding sports a beautiful Tsuchime finish which gives this knife its beautiful aesthetic and aids in preventing corrosion. The stunning octagonal handle is made from Wenge with a Buffalo Horn ferrule and is incredibly durable and comfortable in the hand. The Kiritsuke is another example of a multipurpose knife as it can be used for both boneless meats and vegetables. It has a straighter edge profile which makes push cutting and chopping a breeze whilst the longer blade allows for efficient slicing.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Tadafusa SAN – Petty 135mm
Tadafusa
Manufactured in Niigata City, an area famed for producing tools and knives of exceptional quality as well as the finest Sake in Japan, Tadafusa knives spares no expense when it comes the best quality materials and craftsmanship. Their knives offers fantastic performance and ergonomics catering to both home cooks and industry professionals.
The knife constructed using a Blue Paper core steel which is a high end, high carbon steel which can be heat treated to extremely high hardness levels meaning it can take on finer, sharper edges and maintain these edges for prolonged periods of time. The core steel is cladded in softer stainless steel with a rustic Nashiji finish which not only adds to the aesthetic of the blade but also aids in preventing corrosion. Made from thermally treated Chestnut with a black ferrule, the octagonal Wa handle is both comfortable and durable.
Blade Length: 150mm
HRC: 63
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Narihira – Santoku 165mm
Narihira
Narihira knives are manufactured by Fuji Cutlery Co., Ltd.
The sister company of Tojiro applies advanced construction techniques and modern materials, combined with high quality Japanese quality control to obtain great knives suitable for chefs, home cooks and professionals at a great price.
Santoku:
This is also a multi-purpose knife, but with a slight vegetable bias. Santoku means ‘Three Virtues’ or ‘To solve Three Problems’. The virtues or problems are slicing, dicing and mincing. Santoku is usually found in 160mm – 190mm lengths. These are more and more popular in Western kitchens due to the unique shape and smaller easy to handle size.
Molybdenum Vanadium Stainless steel:
AUS 8 is a high carbon, low chromium stainless steel that has proven, over time, to be a very good compromise between toughness, strength, edge holding and resistance to corrosion.
It has added Vanadium to give the steel more hardness. This steel is very easy to sharpen to a razor edge but it will dull relatively quickly compared to high-carbon.
Knife Specifications:
Knife Shape: Santoku
Blade Length: 165mm
Steel Type: Molybdenum Vanadium Steel
Rockwell Hardness: 59
Handle Material: Western Handle
Delivery time: 3 to 4 Working days
FREE SHIPPING for orders over R850
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Reviews
There are no reviews yet.