Tojiro Gai – Santoku 170mm
R2,550.00
Tojiro Knives
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied. Our knives that are produced by traditional techniques and modern industrial technology are held in the highest regard not only in Japan, but around the world.
The new Gai range from Tojiro is made from 37 layers Damascus VG10 stainless. VG10, a cutlery grade stainless steel produced in Japan. It has a high carbon content which allows it to be heat treated to higher hardness levels thus allowing the blade to take on finer, sharper edges whilst being able to maintain that edge for prolonged periods of time.
The Handle is inspired by the Japanese word Gai, which is roughly translated from the Japanese word for armour. Made from Linen mikarta which is durable, corrosion resistance, and strong against degradation over time. The convex edge of the Gai series cuts effortlessly into food and holds a very good edge.
Santoku
The Santoku is a multi-purpose knife with a blade profile that allows for great versatility and due to this as well as its smaller form factor, it has become very popular in Western kitchens.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
In stock
Related Products
Shibamasa V5 – Santoku
Sibamasa Santoku is made out of Seki, Japan.
The blade is made from VG5 Stainless steel, part of the V Gold stainless steel line. VG5 is similar to VG-10 but with a slightly larger grain structure which results in a higher vanadium content making the knife a bit more durable. VG10 also contains cobalt, which is not added to VG5. Its a durable steel that will hold an good edge and is relatively easy to sharpen.
The thin grind of the Shibamasa makes for a pleasurable cutting feel! The Walnut handle is sturdy, solid and comfortable in the hand.
Well balanced over all and would definitely say great value for money.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Nigara SG2 – Santoku 180mm
Nigara Knives
Nigara Hamono has been a noted over the years ever since they received official appointment by the Tsugaru Clan more than 350 years ago. Every Since then, there blacksmithing techniques have been passed down through generations. They forge each and every knife by hand and pay upmost attention to detail.
Santoku:
This is also a multi-purpose knife, but with a slight vegetable bias. Santoku means ‘Three Virtues’ or ‘To solve Three Problems’. The virtues or problems are slicing, dicing and mincing. Santoku is usually found in 160mm – 190mm lengths. These are more and more popular in Western kitchens due to the unique shape and smaller easy to handle size.
Knife Specifications:
Knife Shape: Santoku
Blade Length: 180 mm
Steel Type: SG2
Rockwell Hardness: 63:64
Delivery time: 2 to 4 Working days
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Tojuro – Santoku 165mm
Tojuro knives are manufactured by Fuji Cutlery Co., Ltd.
The sister company of Tojiro applies advanced construction techniques and modern materials, combined with high quality Japanese quality control to obtain great knives suitable for chefs, home cooks and professionals at a great price.
Santoku:
This is also a multi-purpose knife, but with a slight vegetable bias. Santoku means ‘Three Virtues’ or ‘To solve Three Problems’. The virtues or problems are slicing, dicing and mincing. Santoku is usually found in 160mm – 190mm lengths. These are more and more popular in Western kitchens due to the unique shape and smaller easy to handle size.
Molybdenum Vanadium Stainless steel:
AUS 8 is a high carbon, low chromium stainless steel that has proven, over time, to be a very good compromise between toughness, strength, edge holding and resistance to corrosion.
It has added Vanadium to give the steel more hardness. This steel is very easy to sharpen to a razor edge but it will dull relatively quickly compared to high-carbon.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Sakai Kikumori Nami – AUS10 Damascus Santoku
Sakai Kikumori
With a passionate devotion to knife-making as well as working with some of the most skilled craftsman in Japan, Sakai Kikumori has been making cutlery of incredible quality and performance since its inception in 1926.
The Nami Petty is constructed using a core steel of AUS-10, a stainless steel with a high carbon content that is easy to sharpen and will hold a sharper edge for longer periods of time. AUS-10 is hard yet flexible making it a good compromise between edge retention and durability. The core steel is cladded in softer stainless steel with a mirror Damascus finish giving this blade its striking appearance.
Its fitted with a beautiful Octagonal Oak Handle finished with Black Japanese lacquer. The knife is light and very well balanced.
The Santoku is a multi-purpose knife with a blade profile that allows for great versatility and due to this as well as its smaller form factor, it has become very popular in Western kitchens.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Sakai Kikumori Nihonko – Santoku 180mm
Sakai Kikumori
With a passionate devotion to knife-making as well as working with some of the most skilled craftsman in Japan, Sakai Kikumori has been making cutlery of incredible quality and performance since its inception in 1926.
The Kikumori Nihonko Gyuto is a mono-steel blade made from SK Carbon Steel. SK Rusts slower than other Japanese Carbon Steels such as Aogami and Shirogami and has notable toughness for a blade of HRC 63. The blade is thin and easy to sharpen and will hold edges for respectable periods of time. The handle is a Western Style Handle made from Pakka Wood with a half bolster.
The Santoku is a multi-purpose knife with a blade profile that allows for great versatility and due to this as well as its smaller form factor, it has become very popular in Western kitchens.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Murata Aogami 1 – Santoku 165mm
Murata
Takeo Murata is a blacksmith from Kochi Japan. He started his apprenticeship at 16 in 1965 and is very well known for his craftsmanship and the balance of his knives.
The Murata Santoku is a well balanced with a really nice Black hammered Kurouchi finish. The blade is hand forged from Blue #1 carbon steel Cladded in Softer Iron for added protection. The Murata Santoku is a knife that needs a bit of TLC as the steel is fully reactive but will patina very nicely overtime.
We do recommend grabbing a Rust eraser or Camellia oil for maintenance.
The Santoku is a multi-purpose knife with a blade profile that allows for great versatility and due to this as well as its smaller form factor, it has become very popular in Western kitchens.
Rockwell Hardness is 61-63.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Tojiro Shirogami – Santoku 165mm
Tojiro Knives
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied. Our knives that are produced by traditional techniques and modern industrial technology are held in the highest regard not only in Japan, but around the world.
Santoku:
This is also a multi-purpose knife, but with a slight vegetable bias. Santoku means ‘Three Virtues’ or ‘To solve Three Problems’. The virtues or problems are slicing, dicing and mincing. Santoku is usually found in 160mm – 190mm lengths. These are more and more popular in Western kitchens due to the unique shape and smaller easy to handle size.
Shirogami #2 or White Carbon Steel #2:
Shirogami or White Carbon steel is one of the most pure types of carbon steel. Its made from Iron sand made in Japan.
White Carbon steel is most definitely the easiest steel to sharpen and to achieve an incredible smooth “silky” cutting edge.
These knives do however require special care as they are the most reactive of the carbon steels, after a strong patina has formed on the blade they are less likely to rust.
Knife Specifications:
Knife Shape: Santoku
Blade Length: 165mm
Steel Type: Shirogami #2 / White Carbon # 2
Rockwell Hardness: 61:63
Handle Material: Wa (Japanese) Handle
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
We use Payfast and EFT as payment method.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Mcusta Zanmai Forest – Santoku 180mm
Mcusta Zanmai
Mcusta Zanmai is a knife manufacturer based in Seki, Japan. The are well known for combining craftsman traditions and modern technologies into there knife manufacturing process.
The Forest series from Mcusta Zanmai has been grinded nice and thin giving it a amazing cutting feel. They are made from AUS 8 Steel giving it a bit more durability when comparing it with steel like VG10 but will have a little bit less edge retention. Overall the blade has a really good fit and finish well balanced and comes nice and sharp out of the box.
Santoku:
This is also a multi-purpose knife, but with a slight vegetable bias. Santoku means ‘Three Virtues’ or ‘To solve Three Problems’. The virtues or problems are slicing, dicing and mincing. Santoku is usually found in 160mm – 190mm lengths. These are more and more popular in Western kitchens due to the unique shape and smaller easy to handle size.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Reviews
There are no reviews yet.