Sakai Kikumori AUS10 – Wa-Gyuto 210mm
R3,600.00
Sakai Kikumori
With a passionate devotion to knife-making as well as working with some of the most skilled craftsman in Japan, Sakai Kikumori has been making cutlery of incredible quality and performance since its inception in 1926.
The Kikumori Hammered Damascus Wa-Gyuto is constructed using a core steel of AUS-10, a stainless steel with a high carbon content that is easy to sharpen and will hold a sharper edge for longer periods of time. AUS-10 is hard yet flexible making it a good compromise between edge retention and durability. The core steel is cladded in softer stainless steel with a polished hammered and Damascus finish giving this blade its striking appearance and aids in further preventing corrosion. The handle is octagonal in shape made from magnolia with a buffalo horn ferrule. The Gyuto, an all round knife which can be used for various tasks, is the Japanese version of a chef’s knife. Gyuto’s generally have a flatter blade profile near the heel to aid in chopping, a rounder belly for rock chopping and a sharp, pointed tip for precision cutting.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
In stock
Related Products
Yoshimi Kato – SG2 Bunka Damascus
Yoshimi Kato
Yoshimi Kato first apprenticed at Kanehiro Hamono and then apprenticed under the guidance of Hiroshi-San (his Father in Law) who has also taught great blacksmiths like Yu Kurosaki. Yoshimi Kato strives to continuously improve his skills day by day working from Takefu knife village.
Bunka:
Bunka knives are general purpose knives tackling a wide range of common kitchen tasks. Their reverse tanto profile gives the knives a dexterous and delicate tip and a unique and eye-catching aesthetic. These can be used any time a Gyuto or santoku might be called for. Since Banno Bunkas have fairly flat profiles they are most adept at push cutting and chopping rather than rock chopping.
Delivery time: 3 to 5 Working days
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Sale!
not rated
R5,650.00 R5,150.00
Add to cart
Tojiro DP – SET
Tojiro Knives
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied.
Our knives are produced by traditional techniques and combines modern industrial technology are held in the highest regard not only in Japan, but around the world.
The Tojiro Hammered Series features a 3-ply clad construction with a core of VG-10 super steel. This formula of steel results in 60 Rockwell Hardness and provides a 9-12 degree blade angle for scalpel-like sharpness.
The handle is made from Japanese magnolia, which has a smooth texture and is moisture-resistant. The closed rein collar allows for full and complete sharpening of the blade. Each knife is hand-finished by an artisan craftsman.
This set includes the following:
Tojiro DP – Gyuto 210mm
Tojiro DP – Santoku 170mm
Tojiro DP – Petty 150mm
FREE SHIPPING for orders over R850
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Naniwa Traditional Stone 1000 Grit
Sale!
not rated
R5,500.00 R4,950.00
Read more
Sakai Kikumori – Hand-Forged Shirogami Kurouchi Gyuto 210mm
Sakai Kikumori
With a passionate devotion to knife-making as well as working with some of the most skilled craftsman in Japan, Sakai Kikumori has been making cutlery of incredible quality and performance since its inception in 1926.
The Kikumori Kurouchi 210mm Gyuto is Hand-Forged using a core steel of Shirogami #2 , a carbon steel which is often referred to as White Carbon Steel. It is the purest carbon steel and is incredibly easy to sharpen as well as having good edge retention and insane sharpness. Carbon steel, especially White Carbon Steel, requires special care as they are very reactive however, it is less likely to rust when a strong patina has formed.
Sakai Kikumori uses the following Forging Process:
- Steel welding
The fire kiln is heated by propane gas and the inside temperature is 1,100-1,200 centigrade.
Carbon steel is forged into soft iron at 900 centigrade.
Borax and iron oxides are the glue.
- Forging
Shaping the red-hot blade with a belt hammer.
The surface size of blade will become triplicated by being hammered.
The particle of steel becomes fine by being hammered, and the blade has ductility.
The materials splattered from the surface of the blade when being hammered is iron oxide, called beto.
- Annealing
The blade heated at 740 centigrade is rest in the straw ash for one night to cool down slowly to make the blade softer and to remove the internal stress(distortion).
The straw ash retains heat(hold heat)
- Cold forging and shaping
The knife is hammered at room temperature to remove hammer marks to flatten.
- Quenching
The blade is covered with mud which protects it from sharp changes in high temperature.
The blade is heated again to 750-800 centigrade to toughen the steel, and the blade is quickly cooled in a water bath to ensure hardness.
- Tempering
To give strength and toughness to the steel.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Tsunehisa – Gyuto 210mm
The blade is made from Aogami Super – really easy to sharpen, holds a super fine edge, cuts like silk and is very rugged for its hardness. The super hard steel is then cladded in a softer stainless steel to help lower the possibility of rusting.
Gyuto (Chefs Knife):
The Gyuto is a Japanese designed chef’s knife. Gyutos vary widely in design but generally range from 180mm to 270mm in length though smaller and larger examples can be found. Like the familiar western styled chef’s knife, Gyutos are commonly tall at the heel, have a reasonably flat profile toward the heel for chopping, a belly toward the tip of the blade for rock cutting, and a pointed tip for precision work.
Knife Specifications:
Knife Shape: Gyuto
Blade Length: 210mm
Steel Type: Aogami Super
Rockwell Hardness: 63:64
Handle Material: Wa (Japanese) Handle, Morado wood handle
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Tojiro Oboro Gyuto 200mm
Tojiro Knives
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied. Our knives that are produced by traditional techniques and modern industrial technology are held in the highest regard not only in Japan, but around the world.
Tojiro Oboro range is suitable for both professional and home use. The black and white pattern inspires image of traditional Japanese ink wash painting.
The Handle is made from Linen mikarta which is durable, corrosion resistance, and strong against degradation over time.
Its convex ground blade holds the edge longer, durable, and easy to re-sharpen.
Gyuto
The Gyuto, an all round knife which can be used for various tasks, is the Japanese version of a chef’s knife. Gyuto’s generally have a flatter blade profile near the heel to aid in chopping, a rounder belly for rock chopping and a sharp, pointed tip for precision cutting.
FREE SHIPPING for orders over R850
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Masutani – VG10 Damascus Gyuto 180mm
Masutani Knives
Masutani-San forges knives out of Echizen, Japan. They are a small sized company and produce amazing quality knives for the price. Masutani-San is known as an incredable knife sharpener and all knives comes super sharp out of the box.
The Masutani Damascus Nakiri is constructed using a core steel of VG10, a cutlery grade stainless steel produced in Japan. It has a high carbon content which allows it to be heat treated to higher hardness levels thus allowing the blade to take on finer, sharper edges whilst being able to maintain that edge for prolonged periods of time
Gyuto (Chefs Knife):
The Gyuto is a Japanese designed chef’s knife. Gyutos vary widely in design but generally range from 180mm to 270mm in length though smaller and larger examples can be found. Like the familiar western styled chef’s knife, Gyutos are commonly tall at the heel, have a reasonably flat profile toward the heel for chopping, a belly toward the tip of the blade for rock cutting, and a pointed tip for precision work.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Tojiro – Hammered Kurouchi Petty
Tojiro Knives
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied.
Our knives are produced by traditional techniques and combines modern industrial technology are held in the highest regard not only in Japan, but around the world.
The Tojiro Hammered Series features a 3-ply clad construction with a core of VG-10 super steel. This formula of steel results in 60 Rockwell Hardness and provides a 9-12 degree blade angle for scalpel-like sharpness.
The handle is made from Japanese magnolia, which has a smooth texture and is moisture-resistant. The closed rein collar allows for full and complete sharpening of the blade. Each knife is hand-finished by an artisan craftsman.
Tojiro is exclusively distributed in South Africa by Kitchen Samurai.
About the Petty
“Petty” is the Japanese word for a paring or utility knife and comes from the French word “petite”. It’s perfect for hand peeling fruits and veggies, but also equally as handy for small work on a cutting board.
If you feel uncomfortable with large knives, start with this shape. You really can get a lot done with a 120mm or 150mm petty knife.
Petty knives can be as small as 75mm and as large as 180mm, so there’s something to fit any hand, big or small.
FREE SHIPPING for orders over R500
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Reviews
There are no reviews yet.