Additional information
| Blade Length | 235mm |
|---|---|
| Total Length | 375mm |
| Steel | Molybdenum Vanadium |
| Rockwell Hardness | 58:59 |
Tojiro Bread Slicer 235mm
R550.00
Tojiro Knives
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied.
Our knives are produced by traditional techniques and combines modern industrial technology are held in the highest regard not only in Japan, but around the world.
Tojiro Bread Slicer
The Tojiro Bread slicer features a serrated blade made from Molybdenum Vanadium Stainless steel.
The blade is nice and sturdy and has enough length to slice your large home-made baked bread with ease!
In stock
Related Products
Narihira – Cleaver
Narihira
Narihira knives are manufactured by Fuji Cutlery Co., Ltd. The sister company of Tojiro applies advanced construction techniques and modern materials, combined with high quality Japanese quality control to produce great knives suitable for chefs, home cooks and professionals at a great price.
Molybdenum Vanadium Stainless steel:
MV Stainless is a high carbon, low chromium stainless steel that has proven, over time, to be a very good compromise between toughness, strength, edge holding and resistance to corrosion.
It has added Vanadium to give the steel more hardness. This steel is very easy to sharpen to a razor edge but it will dull relatively quickly compared to high-carbon.
About the Cleaver:
Westerners are most familiar with cleavers as crude tools of butchery but there is tremendous variety and versatility in this class of cutlery.
Traditionally, Chinese cooks use a single cleaver shaped knife for every task in the kitchen, and these prove to be popular in the South African kitchen as well.
The Chinese cleaver or Chinese chef’s knife is a thin delicate knife that slices and chops well with height that can be used to scoop up large volumes of produce and enough mass that the spine or flat of the blade can be used to crush product before cutting.
On the other end of the spectrum, larger, beefier cleavers are some of the few cutlery tools designed to handle cleaving bone in proteins without damaging the knife.
*Note that this is a vegetable cleaver and we do not recommend using this knife on bones.
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R850
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
TOUSHU MV Yanagiba 270mm
TOUSHU
TOUSHU knives are manufactured by Fuji Cutlery Co., Ltd. The sister company of Tojiro applies advanced construction techniques and modern materials, combined with high quality Japanese quality control to produce great knives suitable for chefs, home cooks and professionals at a great price
Yanagiba:
The Yanagiba is like a carving knife on rocket boosters. It slips through food effortlessly and crazy sharpness of the single edge means you will never struggle. Its a true gateway knife for people wanting to get into single bevel knives and learn some cool tricks. When slicing with a yanagiba the blade will naturally want to pull to the left on a right handed knife. (The opposite is true for is true for a lefty. ) As the driver of the blade, you must take control and tell it where to go. Sounds tricky, but you will get the hang of it after a while. Still the Yanagiba can take years to master.
This is a true slicing machine for people who love excellence.
Delivery time: 2 to 4 Working days
FREE SHIPPING for orders over R850
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Nigara SG2 – Santoku 180mm
Nigara Knives
Nigara Hamono has been a noted over the years ever since they received official appointment by the Tsugaru Clan more than 350 years ago. Every Since then, there blacksmithing techniques have been passed down through generations. They forge each and every knife by hand and pay upmost attention to detail.
Santoku:
This is also a multi-purpose knife, but with a slight vegetable bias. Santoku means ‘Three Virtues’ or ‘To solve Three Problems’. The virtues or problems are slicing, dicing and mincing. Santoku is usually found in 160mm – 190mm lengths. These are more and more popular in Western kitchens due to the unique shape and smaller easy to handle size.
Knife Specifications:
Knife Shape: Santoku
Blade Length: 180 mm
Steel Type: SG2
Rockwell Hardness: 63:64
Delivery time: 2 to 4 Working days
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Takamura R2 – Petty 150mm
Terukazu Takamura’s knives are known to be refined with a super sharp long lived edge. They have gained recognition worldwide by chefs and even ranked #1 in a consumer test report by Smarson in Sweden, beating out every “top of the line” European knife in the running.
The Takamura Akagouhan Line is made from a R2 Powdered steel that keeps a super sharp edge for a long time between sharpening. R2 is a high speed powder stainless steel made by Takefu Special steel Co. Ltd. For some knife makers, this is a ideal for knife making like Takamura-san. It has great hardness of greater than 63 HR. This steel has great edge retention, high wear resistance and is stainless. The grains are so fine and uniform that hammer forging is not necessary.
Petty:
This knife is used for smaller jobs that are done on a cutting board. Perfect for slicing shallots, garlic, cutting herbs, and boning smaller proteins. Additionally, Petty knives are an indispensable tool for those who feel uncomfortable wielding a larger chef knife.
Knife Specifications:
Knife Shape: Petty
Blade Length: 150mm
Steel Type: R2 Powdered Stainless Steel
Rockwell Hardness: 63
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Masakage Koishi – Sujihiki 270mm
Masakage Koishi
Masakage Koishi knives are hand forged by Yoshimi Kato. He is an experienced and very well known blacksmith from Echizen, Japan.
The Koishi is Forged from Aogami Super. Aogami Super/Blue Super is an improved version of Aogami # 1. The steel has amazing edge holding capabilities and the edge can be refined to extreme sharpness. The Aogami Super is Cladded in Stainless steel to easy maintenance on the blade. The Aogami Super cutting edge is reactive and will develop a great looking patina if cared for properly. Always make sure to wash and dry your knife properly after use.
Sujihiki has a long narrow blade, perfect for cutting protein into thin slices and trimming off unwanted sinew and fat from meat and due to the length of the blade, slicing can be done in one fluent motion.
The Steel has been hardened to 63:65 Rockwell.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Narihira – Gyuto 210mm
Narihira
Narihira knives are manufactured by Fuji Cutlery Co., Ltd.
The sister company of Tojiro applies advanced construction techniques and modern materials, combined with high quality Japanese quality control to obtain great knives suitable for chefs, home cooks and professionals at a great price.
Gyuto (Chefs Knife):
The Gyuto is a Japanese designed chef’s knife. Gyutos vary widely in design but generally range from 180mm to 270mm in length though smaller and larger examples can be found. Like the familiar western styled chef’s knife, Gyutos are commonly tall at the heel, have a reasonably flat profile toward the heel for chopping, a belly toward the tip of the blade for rock cutting, and a pointed tip for precision work.
Molybdenum Vanadium Stainless steel:
AUS 8 is a high carbon, low chromium stainless steel that has proven, over time, to be a very good compromise between toughness, strength, edge holding and resistance to corrosion.
It has added Vanadium to give the steel more hardness. This steel is very easy to sharpen to a razor edge but it will dull relatively quickly compared to high-carbon.
Knife Specifications:
Knife Shape: Gyuto
Blade Length: 210mm
Steel Type: Molybdenum Vanadium Steel
Rockwell Hardness: 59
Handle Material: Western Handle
Delivery time: 3 to 5 Working days
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Reviews
There are no reviews yet.