Satake Nakiri and Petty Combo Set
R865.00
In stock
Related Products
Yoshimi Kato – Bunka 170mm – Kurouchi AS
Yoshimi Kato
Yoshimi Kato apprenticed at Kanehiro Hamono and then apprenticed under the guidance of Hiroshi-San (his Father in Law) who has also taught great blacksmiths like Yu Kurosaki. Yoshimi Kato strives to continuously improve his skills day by day working from Takefu knife village. Unusual for a blacksmith, Kato-San does not favor a particular steel. He is skilled with all steels that he uses. He believes that heat treating is where you should pay the most attention.
These blades are hand forged with Aogami Super. This steel is really easy to sharpen, takes a brilliant edge, cuts like silk and is super rugged for its hardness. They are then clad in softer stainless steel to help with any maintenance issues.
Aogami Super ( Blue Super Steel ) is an improved version of Blue # 1. For Blue Super (Aogami Super or AS) they add more carbon for hardness. Te extra Vanadium gives extra toughness and creates smaller carbides. Blue Super is often considered by blacksmiths, to be the best carbon steel for knife making in Japan.
Bunka:
Bunka knives are general purpose knives tackling a wide range of common kitchen tasks. Their reverse tanto profile gives the knives a dexterous and delicate tip and a unique and eye-catching aesthetic. These can be used any time a Gyuto or santoku might be called for. Since Banno Bunkas have fairly flat profiles they are most adept at push cutting and chopping rather than rock chopping.
Knife Specifications:
Knife Shape: Bunka
Blade Length: 170 mm
Steel Type: Aogami Super
Rockwell Hardness: 63:64
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R850
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Nigara SG2 – Santoku 180mm
Nigara Knives
Nigara Hamono has been a noted over the years ever since they received official appointment by the Tsugaru Clan more than 350 years ago. Every Since then, there blacksmithing techniques have been passed down through generations. They forge each and every knife by hand and pay upmost attention to detail.
Santoku:
This is also a multi-purpose knife, but with a slight vegetable bias. Santoku means ‘Three Virtues’ or ‘To solve Three Problems’. The virtues or problems are slicing, dicing and mincing. Santoku is usually found in 160mm – 190mm lengths. These are more and more popular in Western kitchens due to the unique shape and smaller easy to handle size.
Knife Specifications:
Knife Shape: Santoku
Blade Length: 180 mm
Steel Type: SG2
Rockwell Hardness: 63:64
Delivery time: 2 to 4 Working days
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Yoshimi Kato – SG2 Bunka Damascus
Yoshimi Kato
Yoshimi Kato first apprenticed at Kanehiro Hamono and then apprenticed under the guidance of Hiroshi-San (his Father in Law) who has also taught great blacksmiths like Yu Kurosaki. Yoshimi Kato strives to continuously improve his skills day by day working from Takefu knife village.
Bunka:
Bunka knives are general purpose knives tackling a wide range of common kitchen tasks. Their reverse tanto profile gives the knives a dexterous and delicate tip and a unique and eye-catching aesthetic. These can be used any time a Gyuto or santoku might be called for. Since Banno Bunkas have fairly flat profiles they are most adept at push cutting and chopping rather than rock chopping.
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
We use Payfast and EFT as payment method.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Tojiro DP -150mm Boning knife
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
Boning knife:
Thes boning knives are made in the traditional Western Style. These Boning knives are rigid without any flex and can be treated a bit more roughly than a Gyuto, but you still need to think about what you are doing.
Great for jobs such as Frenching lamb racks, tunnel boning or breaking down primal cuts of meat.
Knife Specifications
Knife Type: Boning
Material: VG10 Stainless
Blade Length: 165mm
Rockwell Hardness: 60:61
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
We use Payfast and EFT as payment method.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Yu Kurosaki Shizuku – Santoku 165mm
Yu Kurosaki
Kurosaki-san started as a blacksmith at a very young age, starting working at Takefu knife village at the age of 17 and apprenticed under Hiroshi Kato and Katsushige Anryu and ended up as the youngest master blacksmith at Takefu knife village.
His knives are renowned world wide for there unique look and amazing performance!
Santoku:
This is also a multi-purpose knife, but with a slight vegetable bias. Santoku means ‘Three Virtues’ or ‘To solve Three Problems’. The virtues or problems are slicing, dicing and mincing. Santoku is usually found in 160mm – 190mm lengths. These are more and more popular in Western kitchens due to the unique shape and smaller easy to handle size.
SG2/R2 Stainless Steel:
SG2 (Super Gold 2 or R2) is a micro carbide powder stainless steel, one of the hardest blade steel in the world, which provides excellent rust resistance and a long-lasting edge and amazing sharpness.
Knife Specifications:
Knife Shape: Santoku
Blade Length: 165mm
Steel Type: SG2/R2 Stainless
Rockwell Hardness: 63
Handle Material: Wa (Japanese) Walnut Handle
https://youtu.be/l60zBSF9qwY
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Tsunehisa AS – Santoku 165mm
This Blade is made from Aogami Super ( Blue Super Steel ) is an improved version of Blue # 1. For Blue Super (Aogami Super or AS) they add more carbon for hardness. The extra Vanadium gives extra toughness and creates smaller carbides. Blue Super is often considered by blacksmiths, to be the best carbon steel for knife making in Japan.
Santoku:
This is also a multi-purpose knife, but with a slight vegetable bias. Santoku means ‘Three Virtues’ or ‘To solve Three Problems’. The virtues or problems are slicing, dicing and mincing. Santoku is usually found in 160mm – 190mm lengths. These are more and more popular in Western kitchens due to the unique shape and smaller easy to handle size.
Knife Specifications:
Knife Shape: Santoku
Blade Length: 165 mm
Steel Type: Aogami Super
Rockwell Hardness: 63:64
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
RYUTOKU – Deba 150mm
RYUTOKU
RYUTOKU knives are manufactured by Fuji Cutlery Co., Ltd. The sister company of Tojiro applies advanced construction techniques and modern materials, combined with high quality Japanese quality control to produce great knives suitable for chefs, home cooks and professionals at a great price.
Deba:
The Deba is one of the first knives a sushi chef would use when preparing fish. Mainly used for filleting fish but can also be used for doing some poultry work.
These knives, and a considerable amount of skill on the chefs part, are the reason sushi looks so good and why the fish is cleaned so perfectly. Done properly, the bones will be in one pile with almost no meat on them and the meat will be completely bone-free, perfect fillets.
Most debas are single bevel meaning the knife is ground on one side only and the back side of the knife is flat. Single bevels knives have more acute angles on their edges that excel at cutting softer, thinner product like fish but in return require a different skill set to use and sharpen.
Delivery time: 2 to 3 Working days
FREE SHIPPING for orders over R850
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Reviews
There are no reviews yet.