Yu Kurosaki Fujin – Bunka 170mm – VG10 Damascus
R3,550.00
Kurosaki-san started as a blacksmith at a very young age, starting working at Takefu knife village at the age of 17 and apprenticed under Hiroshi Kato and Katsushige Anryu and ended up as the youngest master blacksmith at Takefu knife village.
His knives are renowned world wide for there unique look and amazing performance!
The blade is made from VG10 Stainless. Its a very popular stainless steel for knife makers in Japan. It is produced by Takefu Special steel Co. Ltd. VG10 is specifically designed for kitchen knife making. Its’s relatively easy to work, has great edge retention, hardness and ductility. VG10 is usually hardened to 60-61 HRC.
Bunka:
Bunka knives are general purpose knives tackling a wide range of common kitchen tasks. Their reverse tanto profile gives the knives a dexterous and delicate tip and a unique and eye-catching aesthetic. These can be used any time a Gyuto or santoku might be called for. Since Banno Bunkas have fairly flat profiles they are most adept at push cutting and chopping rather than rock chopping.
Knife Specifications:
Knife Shape: Bunka
Blade Length: 170 mm
Steel Type: VG10 Stainless
Rockwell Hardness: 60:61
Delivery time: 3 to 5 Working days
FREE DELIVERY ACROSS SOUTH AFRICA
We use Payfast and EFT as payment method.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Out of stock
Related Products
Tsunehisa GIN3 – Santoku 165mm
Santoku:
This is also a multi-purpose knife, but with a slight vegetable bias. Santoku means ‘Three Virtues’ or ‘To solve Three Problems’. The virtues or problems are slicing, dicing and mincing. Santoku is usually found in 160mm – 190mm lengths. These are more and more popular in Western kitchens due to the unique shape and smaller easy to handle size.
Delivery time: 3 to 5 Working days
FREE DELIVERY ACROSS SOUTH AFRICA
We use Payfast and EFT as payment method.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Sale!
not rated
R2,950.00 R2,750.00
Read more
Tsunehisa AUS8 – Kiritsuke 210mm
Kiritsuke:
Traditionally a single bevel knife, but most modern Kiritsuke knives are now double beveled, miking it functional for both lef-handed and right-handed users.
The Kiritsuke profile is often quite flat, offering great contact with your cutting board.
It also offers a thin drop tip, which is great for precision work and getting into those nooks and crannies.
Knife Specifications:
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
We use Payfast and EFT as payment method.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Hoehler Handmade – Set with Leather Knife Roll
Hoehler Handmade
.
David Hoehler is a local South African knife Artisan who has been making knives for close to six years and has, up until recently, started making knives full time from his workshop in Sheffield Beach on the North Coast of KZN. David has worked as a professional chef for 8 years and it is for that reason that he has a deep love for kitchen knives thus it becoming his speciality. He uses Sandvik 14c28n stainless steel for his knives which can be heat treated anywhere from 55-62 HRC making it an incredibly versatile steel with great edge retention and corrosion resistant properties. He uses an array of high quality, laminated and dyed blanks made from Birch for the Handles. These handles are incredibly strong as laminated Birch is mostly used for Gun Stocks.
.
This stunning set of knives includes a Carving Fork, Petty, Nakiri, Filleting Knife and a Braai knife (Slicer). Also Included is a Premium leather knife roll manufactured by Arrow Leather Goods. The knife roll offers convenient and safe storage for your knives and also makes travelling with your knives a breeze.
.
Hoehler Handmade – Chefs Knife
Hoehler Handmade
David Hoehler is a local South African knife Artisan who has been making knives for close to six years and has, up until recently, started making knives full time from his workshop in Sheffield Beach on the North Coast of KZN. David has worked as a professional chef for 8 years and it is for that reason that he has a deep love for kitchen knives thus it becoming his speciality. He uses Sandvik 14c28n stainless steel for his knives which can be heat treated anywhere from 55-62 HRC making it an incredibly versatile steel with great edge retention and corrosion resistant properties.
Tojiro – Hammered Kurouchi Gyuto
Tojiro Knives
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied.
Our knives are produced by traditional techniques and combines modern industrial technology are held in the highest regard not only in Japan, but around the world.
The Tojiro Hammered Series features a 3-ply clad construction with a core of VG-10 super steel. This formula of steel results in 60 Rockwell Hardness and provides a 9-12 degree blade angle for scalpel-like sharpness.
The handle is made from Japanese magnolia, which has a smooth texture and is moisture-resistant. The closed rein collar allows for full and complete sharpening of the blade. Each knife is hand-finished by an artisan craftsman.
Tojiro is exclusively distributed in South Africa by Kitchen Samurai.
About the Gyuto:
The Gyuto is a Japanese designed chef’s knife. Gyutos are multi-purpose knives, with a slight meat cutting bias but if you want one knife to do it all, this shape is it.
The longer blade typically gives the blade a forward balance that allows is to work for you, to fit your cutting style. While the balde would ideally be slid forward or back while cutting, they also work great if you prefer to ‘rock’ your knife while cutting.
Gyutos vary widely in design but generally range from 210mm to 270mm in length though smaller and larger examples can be found. Like the familiar western styled chef’s knife, Gyutos are commonly tall at the heel, have a reasonably flat profile toward the heel for chopping, a belly toward the tip of the blade for rock cutting, and a pointed tip for precision work.
FREE SHIPPING for orders over R500
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Nigara SG2 – Santoku 180mm
Nigara Knives
Nigara Hamono has been a noted over the years ever since they received official appointment by the Tsugaru Clan more than 350 years ago. Every Since then, there blacksmithing techniques have been passed down through generations. They forge each and every knife by hand and pay upmost attention to detail.
Santoku:
This is also a multi-purpose knife, but with a slight vegetable bias. Santoku means ‘Three Virtues’ or ‘To solve Three Problems’. The virtues or problems are slicing, dicing and mincing. Santoku is usually found in 160mm – 190mm lengths. These are more and more popular in Western kitchens due to the unique shape and smaller easy to handle size.
Knife Specifications:
Knife Shape: Santoku
Blade Length: 180 mm
Steel Type: SG2
Rockwell Hardness: 63:64
Delivery time: 2 to 4 Working days
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Tojiro – Hammered Kurouchi Nakiri
Tojiro Knives
Tojiro is one of the few manufactures in Japan that performs all of its manufacturing processes in-house. They choose this path of integrated in-house production, from the careful selection of materials to after sale service. The reason why they are able to deliver high quality lies in their commitment to being directly involved in every aspect of making their knives.
As knives are tools that people directly take into their hands to use, Tojiro values the skills of producers, which are the foundation of manufacturing, and keep a close eye on all processes until each craftsman at TOJIRO is completely satisfied.
Our knives are produced by traditional techniques and combines modern industrial technology are held in the highest regard not only in Japan, but around the world.
The Tojiro Hammered Series features a 3-ply clad construction with a core of VG-10 super steel. This formula of steel results in 60 Rockwell Hardness and provides a 9-12 degree blade angle for scalpel-like sharpness.
The handle is made from Japanese magnolia, which has a smooth texture and is moisture-resistant. The closed rein collar allows for full and complete sharpening of the blade. Each knife is hand-finished by an artisan craftsman.
Tojiro is exclusively distributed in South Africa by Kitchen Samurai.
About the Nakiri
Under-utilized in the western kitchen, the Nakiri’s flat blade is meant for the push/pull chopping of vegetables. Since the entire flat edge of the knife touches the cutting board at once, you won’t be turning the vegetable into an ‘accordion’, pieces that are still connected by a thread after you’ve cut them.
The added weight of the blade allow it to fall through food more easily while you chop, so the knife does more of the work for you.
The Nakiri blade shape is a traditional Japanese knife shape, designed for the task of cutting vegetables – a knife that will be appreciated in the hands of a prep cook with mountains of veggies to prepare every day.
Recently, many Nakiris find their way into home kitchens – it’s a perfect knife for vegetarians and veggie lovers.
FREE SHIPPING for orders over R500
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist, cleave or prise the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Sale!
not rated
R3,550.00 R3,250.00
Read more
Tsunehisa AS – Kiritsuke 210mm
Kiritsuke:
Traditionally a single bevel knife, but most modern Kiritsuke knives are now double beveled, miking it functional for both lef-handed and right-handed users.
The Kiritsuke profile is often quite flat, offering great contact with your cutting board.
It also offers a thin drop tip, which is great for precision work and getting into those nooks and crannies.
Delivery time: 3 to 5 Working days
FREE SHIPPING for orders over R500
We use Payfast and EFT as payment method.
Care Instructions:
- Wash and dry the blade by hand immediately after use. Dishwashers are very bad for all knives.
- Use a soft cloth to wash the blade. Avoid abrasive dish scrubbers and powders as these can damage the finish of your beautiful knife.
- Do not cut through bones. You can certainly cut along/beside bones, but do not cut into bones. This can, at worst, chip the blade.
- Never use this knife to cut frozen food. I’m sure you have a 4×4 somewhere in your kitchen for this job.
- Never twist or cleave the blade.
- Always use a wooden or plastic cutting board. Never cut on bamboo, glass, marble, slate, a plate, china, marble, arborite or anything harder than steel.
- Store knives in a way that the blades will not knock into each other.
- Never transport knives unprotected.
Reviews
There are no reviews yet.